Larson Davis System 824 - Data Key

2/19/98 Tools T 5-21
Step 17 To change the “Stop Time 1”, press u or d
to highlight the “Stop Time 1” field.
Step 18 Press r to enter the “Stop Time 1” modifica-
tion field.
Use l or r to highlight the number you want to
change. Once highlighted, use u or d to increment
or decrement the number. Continue this process until
you have the desired “Stop Time 1” entered.
Step 19 For this example, choose a “Stop Time 1” one
minute later than the “Run Time 1”.