2/19/98 Tools T 5-29
“Standby Time” places the 824 in an
energy conservation state by turning
off the LCD (screen), the serial port,
and the DC output, while still gath-
ering data. Here you establish the
“Standby Time” before the 824 auto-
matically powers these features
(LCD, serial port, and DC output)
off.
Step 14 Press c (or r) to enter the “Standby Time”
menu.
Step 15 In order to have the LCD turn off, you must
select “Blank LCD” in the “Power Off Mode”
menu that was shown above. The u and d
arrow keys increment through the minute
numbers, while l and r toggles between
to minute fields. Once you have established a
desired “Standby Time, press c.
Step 16 Use d to highlight “Backlight Time”.
To Next Page
Loading...
