2/19/98 Log - Logging Sound Level Meter (Option 01) 6-3
Step 3 The current data can be witnessed by per-
forming a data reset. Press RESET R.
Notice that the run time clock is set to 00:00:00 and
restarts when the reset is performed.
The screen lists the date and time
when the current measurement
began, along with the current date
and time if the measurement is run-
ning (stop date and time if it is not
running), and the elapsed run time.
Step 4 Now press r to see the “SLM Current-b”
screen.
The “SLM Current-c” screen lists
the Lmax and Lmin values, and the
date and time when they occurred for
the current measurement.
Step 5 Press r to see the “SLM Current-c” screen.
The “SLM Current-d” screen lists
the A, C, and Flat weighted Peak
values along with the date and time
when they occurred for the current
measurement.
Step 6 Press r to see the “SLM Current-d” screen.
To Next Page
Loading...
