2/19/98 Log - Logging Sound Level Meter (Option 01) 6-5
ated with the 824 Sound Level Meter functions. The
“Graph” settings operate the same as was shown ear-
lier in the Simple Sound Analyzer (SSA) section.
Step 2 For review, first verify that “Graph” is high-
lighted.
Step 3 Now press c to activate the “Adjust Graph”
feature.
Step 4 The Scale and Level of the SLM time history
graphic can be adjusted now. Pressing l
and r controls the Scale settings. You can
expand or magnify the display by pressing
r. The left arrow l compresses the dis-
play. Press r
Step 5 Notice the expanded vertical scale. Pressing
the using u or d controls the level. This
moves the measurement up or down within
the display. Press u and d a few times to
To Next Page
Loading...
