2/19/98 Log - Logging Sound Level Meter (Option 01) 6-7
The parameters that can be modified
here include: SLM Detector (Fast,
Slow), SLM Weighting (A,C, Flat),
Range (Normal, Low, High), Trans-
ducer (Condenser microphone, Elec-
tret microphone, and Direct), and
Peak Weighting (A, C, Flat),
Step 9 Press u or d to view the different parame-
ters that can be changed for the current SLM
setup. For this exercise, press d until Pk
Weighting is highlighted.
Step 10 Press r to display the Pk Weighting menu.
You will be required to reset the overall mea-
surement.
Step 11 With “Yes” highlighted, press c to perform
the reset.
To Next Page
Loading...
Need help?
General
