2/19/98 Log - Logging Sound Level Meter (Option 01) 6-13
Step 1 From within the “SLM Ln” window, press c.
The “Graph” settings operate the same as was shown
earlier in the “SLM Current” section. We will skip that
feature now. Press d to highlight “Settings”.
Step 2 Then press r to enter to the “Ln” setting
screen.
Within this screen you can set the Start Level” (mini-
mum dB level associated with the Percentiles graph),
and establish the values for the six Ln’s presented in
the “SLM Ln-a” table.
To Next Page
Loading...
