Laser Technology IMPULSE LR User Manual

T
AKING A
B
ASIC
M
EASUREMENT
Page 25 Electronic Copy of LTI’s Impulse User’s Manual 8
th
Edition © October 1998
Power Conservation Intervals
To help conserve its batteries, the Impulse
incorporates two timed power-off intervals, one for
the scope aiming dot and one for the instrument as
a whole. (The red dot interval does not affect a
fixed-crosshair scope.) By default, if there is no
instrument activity for 15 seconds, the scope
aiming dot turns off. If there is no activity for two
minutes, the instrument turns off completely.
You can change the intervals to make them more
convenient for your measurement conditions. Here
is the procedure:
1. Press Forward/Back as necessary to show the
SYS option.
2. Press Fire to select the SYS option.
3. Press Forward repeatedly until the M
and V indicators begin flashing at the right
center of the screen. The numeric display area
will be showing the current interval settings, like
this:
RIGHT SYS
M
V
The P notation indicates the power-off interval in
minutes; the d shows the scope-dot interval in
seconds.
4. Press Fire repeatedly until the numeric display
shows the intervals you want. Your choices are
these:
P2 d15
power off interval = 2 minutes
scope dot interval = 15 seconds
P5 d15
power off interval = 5 minutes
scope dot interval = 15 seconds
P5 d60
power off interval = 5 minutes
scope dot interval = 60 seconds

Laser Technology IMPULSE LR Specifications

General

Brand	Laser Technology
Model	IMPULSE LR
Category	Measuring Instruments
Language	English