Laser Technology IMPULSE LR User Manual

T
AKING A
H
EIGHT
M
EASUREMENT
Page 32 Electronic Copy of LTI’s Impulse User’s Manual 8
th
Edition © October 1998
display window. At that point, the numeric
display shows the current pivot offset value with
the first digit blinking.
4. Edit in the pivot offset value in whole feet or
meters using the edit function. (See The Edit
Mode for more information.)
Note: The pivot offset cannot exceed 3 meters
(10 feet), and negative values will not be
accepted.
The pivot offset is now activated for all height
measurements, and is denoted by the PIVOT
indicator in the lower portion of the HT option
display screen.
Additional Notes
Some additional notes on using the HT option and
the pivot offset:
• The pivot offset is used only in height
measurements. It has no effect outside the HT
option.
• When you are setting the pivot offset, you can
clear out the current value by long-pressing the
Back button.
• If you change your mind and decide not to
change the offset value after all, short-press the
Back button twice to back out to the main
display.
• A programmed range offset will not affect your
height calculation.

Laser Technology IMPULSE LR Specifications

General

Brand	Laser Technology
Model	IMPULSE LR
Category	Measuring Instruments
Language	English