Laser Technology IMPULSE LR User Manual

D
OWNLOADING
D
ATA
Page 52 Electronic Copy of LTI’s Impulse User’s Manual 8
th
Edition © October 1998
every time the instrument takes a measurement.
The download messages can take one of two
formats: the Impulse native format or, for those who
already have download software designed for the
Criterion family of instruments, the Criterion 400
format. The Impulse native format comes from LTI’s
Impulse series of instruments, and is denoted by
IP200 in the Impulse 200, and IP100 in the Impulse
100.
The DNLD Option
You set the automatic download mode, and change
the download format, with the SYS - DNLD option.
Here is the procedure:
1. Use Forward and Back as needed to display
the SYS indicator.
2. Press Fire to select the SYS option.
3. Press Forward repeatedly until the DNLD
indicator appears in the lower, right corner of
the display window, and On or OFF shows in
the numeric display area. The AUTO indicator
will also show, but will be blinking.
4. Pressing Fire toggles between turning the auto
download feature ‘On’ and ‘OFF.’
5. Press Forward to select On or OFF. The AUTO
indicator disappears and the numeric display
area shows the download message format
setting (CR400, or IP200 or IP100).
6. Press Fire to toggle between CR400 and
IP200/IP100.

Laser Technology IMPULSE LR Specifications

General

Brand	Laser Technology
Model	IMPULSE LR
Category	Measuring Instruments
Language	English