Laser Technology IMPULSE LR User Manual

T
AKING A
M
ULTIPLE
M
EASUREMENT
Page 34 Electronic Copy of LTI’s Impulse User’s Manual 8
th
Edition © October 1998
The multiple measurement option (MULTI) allows
the Impulse to take measurements to a succession
of targets. What it does with those measurements
depends upon the MULTI suboption you are in at
the time:
• DIFF (Difference) compares each measurement
to one set point and reports the difference.
• CUM (Cumulative) accumulates the
measurements and maintains a running total.
Difference Measurements
Difference measurements calculate the differences
between a succession of targets and a single set
point. You can use either horizontal distance
measurements or slope distance measurements
(Impulse 200 only).
Here’s how you take difference measurements:
1. Press Forward/Back until the MULTI indicator
shows in the upper right quadrant of the display
screen.
2. Press Fire to enter the MULTI subprocedure.
The DIFF indicator displays.
3. Press Fire to enter the DIFF subprocedure.
Impulse 100:
The next display is a series of
dashes, with two arrows flashing in the right
corner. The instrument is now ready to accept
the set point.

Laser Technology IMPULSE LR Specifications

General

Brand	Laser Technology
Model	IMPULSE LR
Category	Measuring Instruments
Language	English