About X-431 Station
DiagnosticsToolbox & AppsFAQ
Initial Use
71
www.x431.com +86 755 8455 7891
LAUNCH
Station
User's Guide
X-PROG Immobilizer Programmer
It only applies to the vehicle with 12V battery voltage and OBD II diagnostic socket.
Immobilizer Programmer Binding Screen
Please bind X-PROG to LAUNCH-specic diagnostic tool before using to ensure they can work together.
Note: There are only three chances available for you to bind/unbind the X-PROG to/from the scanner. Pay
extreme caution to do such operations.
Before binding, the following connections are required.
To Next Page
Loading...
