Manual Leapfrog Creatr
12 Leapfrog BV
Unpack the content to any location.
Go back to www.lpfrg.com/support/installation and on the website click on the text Leapfrog
Repetier software” to download Repetier-Host Leapfrog setup” from the website.
Windows 8 Installation steps
Arduino 1.0.5” (ZIP file).
Save unsaved work and write the instructions down
[your computer will reboot into startup options screen]
Copy the command inside the brackets [ shutdown.exe /r /o /f /t 00 ]
Install driver as usual via device manager
To Next Page
Loading...