Need help?Do you have a question about the LeapFrog 3d printer and is the answer not in the manual?
General| Brand | LeapFrog |
|---|---|
| Model | 3d printer |
| Category | 3D Printers |
| Language | English |
Step-by-step guide on how to unpack the 3D printer and connect initial cables.
Instructions for switching the printer's voltage if needed for the local electrical grid.
Guide to download and install necessary software for printer communication and file conversion.
Steps to physically connect the printer to the computer and establish communication.
How to apply and maintain the print bed surface for optimal filament adhesion.
How to connect the computer to the printer using the Repetier-Host software.
Procedure to heat the printer's extruder and print bed before starting a print.
Instructions for loading, unloading, and handling filament for the 3D printer.
Explanation of various print settings like support material, quality, and speed.
Specific guidelines for printing with PVA filament, including settings and maintenance.
How to initiate a print job using G-code or STL files.
Steps for removing the printed object and achieving a desired finish.
Guide on how to perform dual color or multi-material printing.
Guide to installing and activating the Simplify3D software for 3D printing.
How to connect the printer to the computer using the Simplify3D software interface.
Procedure for preheating the extruder and bed within the Simplify3D software.
Using Simplify3D's jog controls to manually operate printer axes and extrusion.
Steps to start printing from G-code or STL files using Simplify3D.
Resources for additional information and tutorials on Simplify3D software features.
Diagnosing and resolving issues where filament fails to feed into the extruder.
Solutions for prints detaching from the print bed, including sticker and warping issues.
Troubleshooting steps for when the extruder stops extruding during a print job.
Addressing min/max temperature errors triggered by the printer's thermistor or wiring.
Steps to clear a clogged nozzle and ensure proper filament extrusion.
How to level both extruders to ensure consistent height for printing.
Guide for updating or re-installing the printer's firmware using Arduino software.
Using Netfabb Cloud Service to repair STL files with geometric errors.
Steps to ensure the heated print bed is properly leveled and calibrated.
Adjusting the offset between dual extruders for accurate multi-material prints.
Resolving issues where printed object dimensions differ from the digital model due to Z-axis steps.
How to measure the Z-axis pulley diameter for firmware compatibility.
Fine-tuning the nozzle-to-bed distance for optimal first layer adhesion.
Diagnosing connection loss issues potentially caused by a faulty internal USB cable.
A flowchart to diagnose and resolve printer connection issues.
A flowchart to determine the correct firmware based on printer hardware specifications.
A flowchart to guide users through various calibration-related printing problems.
A flowchart to identify and resolve issues causing excessive printer noise.
A flowchart to diagnose and fix temperature-related errors during printing.
A flowchart to troubleshoot and resolve extruder jamming problems.
A flowchart to address issues with prints not adhering to the print bed.
A flowchart to troubleshoot connection loss during print jobs.
A flowchart to diagnose why the print bed is not reaching the target temperature.
A flowchart to help identify and fix common print quality issues.
To Next Page