Manual Leapfrog Creatr
2 Leapfrog BV
Dear customer,
Congratulations with the purchase of your very own Leapfrog Creatr Single or Dual Extruder! We would
like to help you get started so you can make your first 3D print on the Creatr and many more.
This is why we have developed this document; it will guide you through unpacking, installation and the
print settings. We also provide you with guidelines to get you back on track if something should go
wrong.
It is possible that after reading this document or while operating your printer you have a question that is
not listed in this document. Therefore, we also explain you how to contact our support department.
We wish you happy printing!
With kind regards,
The Leapfrog team
To Next Page
Loading...
Need help?
General