Manual Leapfrog Creatr
24 Leapfrog BV
Hold the roll so the unapplied tape remains tense, press the tape down by sliding 2-3 fingers from
side to side or use an old bank card.
2.2 Connection
In order for your computer to tell your printer what to do, you will need to connect your computer to your
printer. In this step we will show you how to do this.
Open Repetier Host Leapfrog and click the Connect” button. The button will change from red to
green. Your printer is now connected to the computer.
To Next Page
Loading...
Need help?
General