Manual Leapfrog Creatr
22 Leapfrog BV
If the print sticker is damaged and you cannot position your print on an undamaged spot, remove
the sticker by lifting one of the corners of the sticker and peeling it off. If you remove it too
quickly, the sticker is more likely to tear.
Remove the sticker glue by applying sticker remover or glass cleaner on the printbed. Be sure to
remove the whole sticker and all of the sticker glue so you will end up with a clean glass plate. If
residue is left behind, this could affect your print quality.
To Next Page
Loading...
Need help?
General