LeapFrog 3d printer User Manual

Manual Leapfrog Creatr
76 Leapfrog BV
 Remove the heat cartridge by loosening the Allen screw in the heating block.
 Turn the hot end, this will allow you to remove the thermistor.
 Screw off the old nozzle, screw on the new nozzle, and tighten its position by mounting the
heating block against it.
 Re-attach the hot end in the opposite order as you disassembled it, and follow the extruder
height calibration as displayed in section 3.6.

LeapFrog 3d printer Specifications

General

Brand	LeapFrog
Model	3d printer
Category	3D Printers
Language	English