LeeBoy 7000 - HOW TO OPERATE

AUTOMATIC AUGERS: NEW STYLE
(TIED IN
WITH CONVEYORS)
Automatic augers are mostly used when paving 9' or
10' . where' augers are capable of running material over
top of endgates, causing extra hand work.
! CAUTION !
NEVER RUN AUGERS WHEN PAVING 8
1
WIDE.
NEVER RUN AUGERS IN REVERSE TO PUSH
MATERIAL
FROM LEFT TO RIGHT OR RIGHT TO
LEFT. Center chain guard prohibits material from
croSsing from one side to the other. (Damage will
occur).
HOW TO OPERATE:
1. Pull auger control handles on valve to "on" for
augers to feed extensions.
2 Tum left & right auger toggles on dash "on",
Now the augers will come on and off with the
conveyors.
3. When paving wider widths, and augers do not
provide sufficient asphalt flow, refer to the
following
step that identifies to the corresponding
machine.
15