LeeBoy 7000 - MAINTENANCE ADJUSTMENTS; TO RAISE FEEDERS

MAINTENANCE ADJUSTMENTS
TO RAISE FEEDERS
1. Foldhopperwings all the way in and pull boltsout.
Grabtopwingsand
pull out5" or 6", then pullbottom
handleouttil wing knuckles out. To let wingsdown
justpullontopofwingandletdowntowherebolts
will
go in. see figure 30.
FIGURE 30
2. Raisefeeders by pushing feeder lift valve forward.
Thelocationofthisvalvehaspurposelybee
nplaced
in an inconvenient position
to prevent the acci-
dental raisingof the feeders. See Figure
31.
FIGURE 31
3. IMMEDIATELY AFTER RAISING FEEDERS, PLACE
THE SAFETY PROP IN POSITION.
Seefigure32.
26
4. Afterthe fe.eder is in position, lowerthe feeder onto
the safety prop. This will provide an extra margin
safetypreventing safety propfromaccidentially be-
ingdislodged.
! CAUTION !
BEFORE RAISING OR lOWERING FEEDERS, FOLD
SIDES INTO
THE FULL IN POSITION.
FIGURE 32
! DANGER ! .
USEEXTREMECAUTION WHEN WORKING UNDER'
FEEDERS.
CLEAR AREA OF UNTRAINED PER-
SONNEL. PLACE SAFETY PROP INTO SUPPORT
POSITION ANI) LOWER FEEDERS UNTIL SAFETY"
PROP IS UNDER LOAD AND FIRMLY WEDGED. .