Leica Microsystems M320 - Positioning at the Operating Table; Mounting Sterile Components

Preperation before surgery
20 M320 Ref. 10734261 / Version 03 M320 Ref. 10734261 / Version 03 21
7.11 Positioning at the operating table
7.11.1 Positioning options
X
Carefully move the surgical microscope at the column to the
operating table and position it for the forth coming operation.
X
Tighten the footbrakes.
7.12 Mounting sterile components
CAUTION
Danger of infection!
X
Avoid touching the sterile components.
X
Allow sucient free space.
X
Do not install the sterile components until shortly
before the operation.
Handle sleeves and caps for the magnification changer are
steam and gas-sterilizable.
X
Sterilize the handle sleeves and caps after use.
1
X
Insert until the handle
sleeve clicks into place.
2
X
Attach the caps.
3
X
Attach protective glass on
objective. The noise points
forwards (fine focus
objectives) or 90° to the
left/right (fixed objectives).