Leica Microsystems M320 - Installing the Drape; Balancing the Swing Arm; Adjusting the Interpupillary Distance; Checking the Illumination

Preperation before surgery
22 M320 Ref. 10734261 / Version 03 M320 Ref. 10734261 / Version 03 23
7.13 Installing the drape
CAUTION
Danger of overheating!
X
Do not wrap the drape
around the microscope
too tightly. The
distance between the
microscope and drape
should be 20 cm.
7.14 Balancing the swing arm
For general preparation see chapter 6.2, "Balancing system". Also
check the movement of the swing arm before positioning the
microscope over the patient.
7.15 Adjusting the interpupillary
distance
X
Look into the eyepieces.
Depending on the model,
move the tube manually or
using the drive knob until a
circular field is visible.
7.16 Checking the illumination
X
Turn the rotary knob from
zero to maximum brightness.
X
For the general preparation see chapter 6.1,
"Illumination".
X
Also check the brightness and filters before positioning
the microscope above the patient.