Specifications
58 M320 Ref. 10734261 / Version 03 M320 Ref. 10734261 / Version 03 59
13.11 Standards fulfilled
CE conformity
•
Medical electrical equipment, part 1: General requirements for Safety IEC/60601-1; EN/60601-1; UL60601-1;
CAN/CSA C22.2 NO 60601-1-14:2014.
•
Electromagnetic compatibility IEC/60601-1-2; EN/60601-1-2.
•
Leica Microsystems (Schweiz) AG, Medical Division has a management system which corresponds to the requirements of the
international standard ISO/13485 for quality management and quality assurance.
13.12 Limitations on use
•
The Leica M320 surgical microscope may be used in enclosed rooms and on flat surfaces with max. 0.3° unevenness and on stable walls
or ceilings that fulfill our specifications (see Installation Manual).
•
Not intended for ophthalmology.
•
The Leica F12 stand is not intended to be moved down steps of more than 20 mm in height.
•
To move the surgical microscope over thresholds of 20 mm, the wedge (arrow) included in the packaging can be used.
•
Without auxiliary equipment, the Leica M320 can only be moved across thresholds up to a max. height of 5 mm.
X
Place the wedge (arrow) in front of the threshold.
X
Move the surgical microscope across the threshold in transport position, pushing it by the handgrip.
To Next Page