II M320 Ref. 10734261 / Version 03 M320 Ref. 10734261 / Version 03 1
Contents
1 Introduction 2
1.1 About this user manual 2
1.2 Symbols in this user manual 2
1.3 Required tools 2
2 Product identification 3
3 Safety notes 4
3.1 Intended use 4
3.2 Indications for use 4
3.3 Contraindications 4
3.4 Information for the person responsible
for the instrument 4
3.5 User qualifications 5
3.6 Directions for the user of the instrument 5
3.7 Dangers of use 6
4 Signs and labels 7
5 Design 10
5.1 Stands 10
5.2 Swing arm and horizontal arm 11
5.3 Optics carrier 11
5.4 Microscope carrier 12
5.5 Brake knobs/articulation brakes 12
5.6 Connections 13
6 Functions 14
6.1 Illumination 14
6.2 Balancing system 14
6.3 Footbrakes 15
7 Preperation before surgery 16
7.1 Transportation 16
7.2 Installing the accessories 18
7.3 Documentation output 18
7.4 Handles 18
7.5 ErgonOptic Dent 19
7.6 ErgoWedge 19
7.7 Objectives 20
7.8 Protective glass 20
7.9 Installing the binocular tube 20
7.10 Eyepieces 20
7.11 Positioning at the operating table 21
7.12 Mounting sterile components 21
7.13 Installing the drape 22
7.14 Balancing the swing arm 22
7.15 Adjusting the interpupillary distance 22
7.16 Checking the illumination 22
7.17 Changing the accessories of the surgical
microscope and balancing the swing arm 23
7.18 Adjusting the parfocality
with camera and monitor 23
7.19 Adjusting the parfocality
without camera and monitor 24
7.20 Check the remote control and camera 25
7.21 Checklist before surgery 26
8 Operation 27
8.1 Starting up 27
8.2 Adjusting the design LED illuminator 28
8.3 Adjusting the working distance 28
8.4 Adjusting the illumination 29
8.5 Re-equipping during operation 29
8.6 Decommissioning 29
8.7 Binocular tubes 30
8.8 External orange filter 30
8.9 Double Iris Diaphragm 30
9 Video Camera 31
9.1 Information 31
9.2 SD Memory Card 32
9.3 Remote control 32
9.4 On Screen Menu 33
10 Care and maintenance 48
10.1 Care instructions 48
10.2 Maintenance 49
10.3 Notes on reprocessing of resterilizable products 50
10.4 Changing fuses 52
11 Disposal 52
12 What to do if ... ? 53
12.1 Microscope 53
12.2 Video camera 54
13 Specifications 55
13.1 Electrical data 55
13.2 Surgical microscope 55
13.3 Lamps 55
13.4 Stands 56
13.5 Optical data 56
13.6 Accessories 56
13.7 Video accessories 57
13.8 Ambient conditions 57
13.9 Electromagnetic compatibility (EMC) 58
13.10 Compliance IEC 60601-1-2 58
13.11 Standards fulfilled 59
13.12 Limitations on use 59
13.13 Working range 60
13.14 Dimensions F12 (in mm) 61
To Next Page
Loading...