Leica TS07 - Check

Field Option Description
D Display only Horizontal offset: Positive if the stake out
point is further away than the measured
point.
ΔHeight Display only Height offset: Positive if the stake out point
is higher than the measured point.
ΔChain Display only Longitudinal offset: Positive if the stake out
point is further away than the measured
point.
ΔOffset Display only Perpendicular offset: Positive if the stake out
point is to the right of the measured point.
Def. East Display only Calculated East coordinate of the stake out
point.
Def. North Display only Calculated North coordinate of the stake out
point.
Def. Height Display only Calculated Height of the stake out point.
•
Either, press Meas to measure and record.
•
Or, press ESC to return to the Setout/Check/Slope values screen.
7.13.5 Check
The subapp Check is used for as-built checks. The points can be measured or
selected from the memory. The chainage and offset values are relative to an
existing horizontal alignment, and the height difference is relative to a vertical
alignment or manually entered height.
TSOX_053
a
P1
P2
c+
d+
b
c-
d-
P0
P0 Instrument station
P1 Target point
P2 Target point
a Horizontal alignment
b Chainage
c+ Offset, positive
c- Offset, negative
d+ Height difference, positive
d- Height difference, negative
Defined chainage and increment values will not be considered in the subapp
Check.
Press Check from the Setout/Check/Slope values screen.
Next step
Description
☞
Access
Apps 129