Messages Description
Last traverse not yet fin-
ished or processed! Do
you want to continue ?
The Traverse app was quit without closing a
traverse. The traverse can be continued on a
new station, left unfinished, or a new tra-
verse started and the old traverse data over-
written.
Do you really want to
start a new traverse ? All
existing data will be over-
written!
Confirmation of this message will start a new
traverse and the old traverse data will be
overwritten.
Redo last station ? Meas-
urements of this station
will be overwritten!
Confirming returns to the first sight point
screen for the previous station measure-
ments. The data from the last station is not
stored.
Exit Traverse application ?
Current station data will
be lost!!!
Quitting the app returns to the Main Menu.
The traverse can be continued later, but the
current station data will be lost.
Out of Tolerance! The tolerance limits have been exceeded. If
not accepted, the calculations can be redone.
Traverse points are re- cal-
culated and newly stored…
An information message displayed while the
adjustment is calculated.
7.15 Tunnel
Refer to the separate manual "Leica TS03/TS07 Tunnel Application".
☞
Apps 143
To Next Page
Loading...
