Description of fields
Field Option Description
No.of Stn. Display only Number of stations in the traverse.
Azimuth Err. Display only Azimuth closure error.
Misc.-Distr. For misclosure distribution.
☞
Angle misclosures are distributed
equall
y.
Compass For surveys where angles and distances were
measured with equal precision.
Transit For surveys where angles were measured
with a higher precision than the distances.
Height-Distr Selectable list The height error can be distributed equally,
by distance or not at all.
Scale Display only PPM value defined by the calculated distance
between start and end point divided by the
distance measured.
Use Scale Selectable list Whether to use the calculated ppm.
•
Dep
ending on the number of measured points the calculation may take
some time. A message is displayed during the processing.
•
Adjusted points are stored as fixpoints with an additional prefix, for exam-
ple point BS-154.B is stored as CBS-154.B.
•
After the adjustment, Traverse is exited and the system returns to the
Main Menu.
The following are important messages or warnings that may appear.
Messages Description
Memory is nearly full! Do
you w
ant to continue ?
This message occurs if less than 10% of the
memory is free. It is not recommended to
start a traverse if the memory is almost full.
Doing so, may mean that the traverse meas-
urements and the results cannot be saved.
Current job contains an
adjusted Traverse. Select a
different job!
Only one traverse per job is allowed. Another
job must be selected.
Set Adjustment
P
arameter
☞
Messages
142 Apps
To Next Page
