Field Option Description
Target
Height
Input field for prism height.
Code Editable field for codes.
Hz angle Display only field for the horizontal angle.
V angle Display only field for vertical angle.
Hor. dist. Display only field for horizontal distance.
Slope dist. Display only field for measured slope dis-
tance.
Height diff. Display only field for the height difference
between station and reflector.
Easting Display only field for Easting coordinate of
measured point.
Northing Display only field for Northing coordinate of
measured point.
Height Display only field for the height coordinate of
the measured point.
Line space Insert full line space.
Show in
Map
Measure-
ments
To display only measured points.
Fixpoints To display only fixpoints.
Meas &
Fixpts
To display measured points and fixpoints.
Show PtID Yes The ID of a point is displayed in the map.
No Display of point IDs in the map is deactiva-
ted.
Show
PtCode
Yes The code of a point is displayed in the map.
No Display of point codes in the map is deacti-
vated.
Only 50 Pts Yes Only the first 50 point labels are displayed in
the map.
No All point labels are displayed in the map,
regardless of the number of points in the
job.
Centre to The selection changes the behaviour of the
icon on the Mapview toolbar and the naming
of the corresponding softkey.
Station To centre the map on the instrument.
Target To centre the map on the target.
Settings 45
To Next Page
