Leica TS07 - Page 47

Field Option Description
Zenith
90°
270°
180°
0°
45°
TSOX_018
Zenith=0°; Horizon=90°.
Horizon
180°
+90°
-90°
+45°
-45°
0°
TSOX_019
Zenith=90°; Horizon=0°.
Vertical angles are positive above the horizon
and negative below it.
Slope [%]
Slope %
+300 %
+100%
+18 %
0°
-100 %
-300 %
20°
45°
71°34”
360s
gon
-50 gon
-79,5 gon
--.--%
--.--%
±V
TSOX_020
45°=100%; Horizon=0°.
Vertical angles are expressed in % with posi-
tive above the horizon and negative below it.
☞
The % value increases rapidly. --.--
% appears on the display above
300%.
V After DIST Sets if the vertical angle value recorded is
the value that is displayed when Dist or
when Store is pressed. The vertical angle
field in a measurement screen always shows
the running angle, regardless of this setting.
Hold The vertical angle value that is recorded is
the value that was in the vertical angle field
at the time Dist was pressed.
Running The vertical angle value that is recorded is
the value in the vertical angle field at the
time Store is pressed.
☞
This setting is not applicable for the app Tie
Distance or the favourites Hidden Pointand
Height Transfer. For these, the vertical angle
is always running and the value recorded is
the value when Store is pressed.
Settings 47