Leisure Unity 2020 - Driver;Passenger Seat Controls

MOTORHOME OPERATION UNITY MOTORHOME
36
DRIVER/PASSENGER SEAT
CONTROLS
SWIVEL FUNCTION
1. To activate the swivel function of a seat, push the
door control seat switch
1
forward to slide the
seat forward. It is essential that the seat is moved
forward to prevent damage to the door panel and
post when swiveling the seat.
1
2. Move armrest
2
into upright position.
2
3. Pull the swivel lock lever
3
(located near the base
of the seat) to the left, and swivel the seat slowly
toward the center line of the motorhome to prevent
damage to the seat, door panel and post.
3
 ᘐ CAUTION
Swivel must be locked in the forward facing
position when vehicle is in motion. Always open
door slightly, and swivel driver’s seat clockwise,
or swivel passenger’s seat counterclockwise.
LUMBAR SUPPORT
Use the lumbar support controls
4
to adjust the support
to suit your comfort needs.
4