LELY CRS M3 - Control Panel and Interface Details

The CRS M3 is a modular system, so it can be fitted to specific needs. The
standard configuration can be expanded with optional modules:
• Standard configuration:
•
1x CRS M3 cabinet
• 1x Air valves block
• 1x Filter/pressure reducer
• Optional modules:
• Air valves block(s)
• Extension cabinet
4.2 Control Panels CRS M3 and Extension Cabinet
4.2.1 CRS M3 Cabinet
The control panel on the CRS M3 cabinet has these buttons and indicator
LEDs:
Figure 3. CRS M3 control panel
KEY:
1. Milk tank selection button - 2. Tank driver procedure button - 3. Partial milk collection
button - 4. Main tank valve button - 5. Cluster selection button - 6. Twin filter reset button -
7. Alarm buzzer mute button - 8. CRS M3 status LED
Buttons/LEDs Explanation
Main tank selection button (1) Push the button to select a main tank. The green LED shows the selected
milk tank.
Tank driver procedure button
(2)
Push and hold the button for 2 seconds to start or stop the tank driver
procedure for the selected main tank:
• Green LED flashes: start/stop tank driver procedure requested
•
Green LED is on: system is ready to empty the main tank
4-2 Description
PDF of the English original HTML, 5.1004.8514.0 -