Device level
To reset the alarms per device.
1. In the Modalarm web interface select the tab 'Dashboard'.
2.
In the field 'Connected devices' select the button 'Reset alarms'.
Modalarm level
To reset all Modalarm alarms.
3. In the Modalarm web interface select the tab 'Dashboard'.
4. In the field 'Active alarms' select the button 'Reset alarms'.
5.3.2.3 Set the Alarms to Maintenance Mode
This setting makes sure that there will be no alarms over the next four hours
for the applicable device.
1. In the Modalarm web interface select the tab 'Dashboard'.
2. In the field 'Connected devices' select the button [Maintenance mode].
The button then shows the end time of the maintenance mode.
5.3.2.4 Modalarm Logbook
1. In the Modalarm web interface select the tab 'Dashboard'.
2. The field 'Logbook' open the drop-down menu 'Filter modules' and
select a module (e.g. GSM or PSTN show if the phone calls were
generated).
3. Optionally select the 'Since date' and the 'Until date'.
5.3.3 Tab 'Devices'
5.3.3.1 Set the Day/Night Schedule for the Alarms
1.
In the Modalarm web interface select the tab 'Devices'.
2.
Select the applicable device.
3. For all the alarms tick the boxes for day and/or night.
4. Optional: select the button [Copy day / night alarm settings] to apply
the settings to all devices of the same type.
Operating Instructions 5-11
PDF of the English original HTML, 5.1004.8514.0 -
To Next Page
Loading...