LELY CRS M3 - CRS M3 Functions; Tank Driver Procedure

Figure 5. CRS M3 web interface
KEY:
1. Navigation bar - 2. User tabs - 3. CRS M3 tabs - 4. Information fields
• Tab 'Farm overview':
• Field 'Device info': shows the status of the tank room components
•
Field 'Cluster overview': shows the status of the installed cluster(s)
• Field 'Robot Information System': shows the status of the robot unit(s)
• Field 'List of active alarms': shows the list of active alarms
• Tab 'Cluster cleaning time': shows the scheduled cluster rinses and
cleanings
• Tab 'Tests': to test the alarm system
4.4 CRS M3 Functions
4.4.1 Tank Driver Procedure
The tank driver procedure must not be used to partially empty the main tank,
because the main tank will be cleaned at the end of the tank driver
procedure.
The tank driver procedure is used to completely empty a main tank. The tank
driver procedure can be started (page 5‑
3) with the buttons on the CRS
M3 cabinet or with the button on the main tank itself.
Description 4-5
PDF of the English original HTML, 5.1004.8514.0 -