5.3.6.4 Edit the PSTN/GSM Settings
PSTN
1. In the Modalarm web interface select the tab 'Settings'.
2.
In the field 'Interfaces' > 'PSTN' select the button [Edit]:
1. If applicable fill in the PSTN prefix.
2. If 'Wait time' (wait for dial tone) is necessary fill in ','.
3. If necessary adjust the audio level of the speech files.
3. Select the button [Save].
GSM
4. In the Modalarm web interface select the tab 'Settings'.
5. In the field 'Interfaces' > 'GSM' select the button [Edit]:
1. Set the PIN code.
2. If necessary adjust the audio level of the speech files.
6. Select the button [Save].
5.4 View the List of Active Alarms in T4C
1. In T4C go to 'Analysis/Reports' > 'Device Indications'.
5-14 Operating Instructions
PDF of the English original HTML, 5.1004.8514.0 -
To Next Page
Loading...