5.2 CRS M3 Web Interface
5.2.1 Open the CRS M3 Web Interface
1. In T4C select: 'Configuration' > 'Devices' > tab 'T4C Network' > CRS
M3 URL.
The CRS M3 web interface is opened, log in is done automatically.
5.2.2 Adjust Cluster Cleaning Times
1. In the CRS M3 web interface select the tab 'Cluster cleaning time'.
2. Adjust the applicable field(s):
1.
Make sure that the scheduled times do not overlap.
2. There must be preferably 3 hours in between two cluster
cleanings.
3. Schedule at least two, but preferably three, cluster cleanings
per day.
3. Select the button [Save].
5.2.3 Put a Cluster in or out of Operation
5.2.3.1 Put a Cluster in Operation
A cluster is in operation when all robot units in the cluster are put in
operation locally and the cluster is put in operation with the CRS M3 web
interface.
1. In the CRS M3 web interface select the tab 'Farm overview'.
2. In the field 'Cluster overview' select the applicable cluster.
3. Select the button [On].
4. A pop-up window appears shows the question 'Going in operation.
Start a cluster rinse?'. Select button:
• [OK] or
• [Cancel]
Cancel is only to not do the cluster rinse, the cluster will be put in operation.
5.2.3.2 Put a Cluster out of Operation
1. In the CRS M3 web interface select the tab 'Farm overview'.
2. In the field 'Cluster overview' select the applicable cluster.
3. Select the button 'Off'.
The selected cluster is taken out of operation.
Operating Instructions 5-9
PDF of the English original HTML, 5.1004.8514.0 -
To Next Page
Loading...