LELY CRS M3 - ModAlarm System Configuration

5.2.4 Clear the List of Active Alarms
This action only clears the list of active CRS M3 and Astronaut alarms. Be
aware that it does NOT solve the cause of the alarm(s).The cause of the
alarm(s) must be removed, to prevent a new notification of the alarm(s).
1. In the CRS M3 web interface select the tab 'Farm overview'.
2.
In the field 'List of active alarms' select the button [Clear alarm list].
5.2.5 Test the Telephone Connection
1. In the CRS M3 web interface select the tab 'Tests'.
2. Select the button [Test].
A test alarm is sent to the Modalarm. The Modalarm will generate the
phone call.
5.3
ModAlarm
5.3.1 Open the Modalarm Web Interface
1. In T4C select: 'Configuration' > 'Devices' > tab 'T4C Network' >
Modalarm URL.
The Modalarm web interface is opened.
2.
Log in (the name and password are provided during installation of the
CRS M3).
5.3.2
Tab 'Dashboard'
5.3.2.1 View the List of Active Alarms
1. In the Modalarm web interface select the tab 'Dashboard':
• The field 'Connected devices' shows the number of alarms per
device.
• The field 'Active alarms' shows the list of active alarms.
If a Vector is installed, then this list also shows the active Vector alarms.
5.3.2.2 Clear the Alarm List
This action only clears the list of active Modalarm alarms. Be aware that it
does NOT solve the cause of the alarm(s).The cause of the alarm(s) must be
removed, to prevent a new notification of the alarm(s).
5-10 Operating Instructions
PDF of the English original HTML, 5.1004.8514.0 -