LELY Shuttle - Astronaut A5 E-Link Settings

5.1501.8502.0 A
Operating Instructions 5-3
6. Set at No. of empty bottles for alarm the number of empty sample bottles before an alarm is
generated.
1. Button Edit.
2. Set the value with the keypad or use the button
to lower or to raise the value.
• The default value is 3.
• 0 (no phone call) < x (CRS+ phone call).
• If x > 0 then a call out is generated.
3. Button OK.
The Fill time sample bottle (Shuttle) should be adjusted so that the spoon does not
overflow. The Fill time sample bottle (Shuttle) for a spoon with 10 ml (0.34 oz) is
shorter than for a 50 ml (0.34 oz) spoon.
7. Set at Fill time sample bottle (Shuttle) the fill time of the sample bottle.
1. Button Edit.
2. Set the value with the keypad or use the button
to lower or to raise the value.
• The default value is 20 sec.
3. Button OK.
8. Set at Fill time sample bottle (one bottle) the fill time of the sample bottle (one bottle).
1. Button Edit.
2. Set the value with the keypad or use the button
to lower or to raise the value.
• The default value is 20 sec.
3. Button OK.
5.3.2.2 Astronaut A5 E-Link Settings
1. On the E-Link select:
1. Button
.
2. Tab Settings > Settings > Milk procedure > Milk sampling.
in n o vato rs in agriculture