Lenovo ThinkServer TS460 - Removing the Cpu

4.InserttheRAID520ikeyintotheJ3connectorontheLenovoThinkServerRAID520iPCIeAdapter.
EnsurethattheRAID510ikeyissecurelyseatedontheRAIDcard.
Note:Ifnecessary,removetheRAIDcardfirstforeasieroperation.Then,reinstalltheRAIDcard.See
“InstallingaPCIecard”onpage63
.
Figure76.InstallingtheRAID520ikey
ForinformationaboutconfiguringhardwareRAID,refertotheMegaRAIDSASSoftwareUserGuide.This
guideisavailableontheLenovoSupportWebsiteat:
http://www.lenovo.com/support
CPU
•“RemovingtheCPU”onpage104
•“InstallingtheCPU”onpage105
CAUTION:
TheheatsinkandfanassemblyandtheCPUmightbeveryhot.Turnofftheserverandwaitthreeto
fiveminutestolettheservercoolbeforeremovingtheservercover.
Note:EnsurethatthenewCPUisthecorrecttypeyourserversupports.See“Memorymoduleinstallation
rules”onpage60.
RemovingtheCPU
ToremovetheCPU,dothefollowing:
1.Prepareyourserverandremovetheservercover.See“Preparingyourserverinadvanceandremoving
theservercover”onpage57.
2.Laytheserveronitssideforeasieroperation.
3.Removetheheatsinkandfanassembly.See“Removingtheheatsinkandfanassembly”onpage95.
104ThinkServerTS460UserGuideandHardwareMaintenanceManual