52 NE1032T Installation Guide
3. Securetheair‐ductmountingbrackettotherailswithM6screws.Torquethe
screwstoapproximately5.7Nm±0.1Nm(50inch‐pounds).
Note: ReusetheoriginalM6screwsusedtofastenthe4‐postrackmounting
bracketstosecuretheairductmountingbracketswith4‐post
mountingbrackets
together.
4. Securetheair‐ductmountingbrackettotherackchassiswithM3.5screws.Torque
thescrewstoapproximately1.1Nm±0.1Nm(10inch‐pounds).
5. PlugthepowercordsintotheirrespectiveNE1032Tpowerconnectorsandusingtie
wraps,securethepowercordstothemounting
rails.
M3.5 screws
Air duct mounting bracket
M6 screws
Tie wraps
Tie wraps
Power connection
Power connection