• With two installed processors: system air baffle.
• With four installed processors:
– Processor and memory expansion tray
– Two expansion tray air baffles, one under the tray and the other on the tray
Figure 177. Installing the air baffle to the system board
Figure 178. Installing air baffle to the expansion tray
Attention: Air baffle is required for airflow that creates proper cooling. Make sure to install proper air
baffles for system configuration before the power is turned on.
4. If the top cover has been removed, reinstall it. See
“Install the top cover” on page 242.
5. Reconnect external cables and power cords to the server.
Attention: To avoid component damage, connect the power cords last.
6. Update the server configuration.
Chapter 4. Hardware replacement procedures 283
To Next Page
Loading...
