Lenze i510 Series

8.2 Motor control selecon
Optimisation of the control loopsOptimisation of motor controlSetting of motor data Motor control selection
The inverter supports dierent modes for closed-loop/open-loop motor control.
Parameter Name / value range / [default seng] Info
0x2C00
(P300.00)
Motor control mode
(Motor ctrl mode)
•
Seng can only be changed if the inverter is inhibi-
ted.
Selecon of the motor control type.
3 Sensorless control (SL PSM) (from
version 02.00)
This control type is used for the sensorless control of a synchronous
motor.
4Sensorless control for synchronous motors (SL-PSM) ^ 125
4 Sensorless vector control (SLVC) This control type is used for sensorless vector control of an asynchro-
nous motor.
4Sensorless vector control (SLVC) ^ 122
6 V/f characterisc control (VFC open loop) This control mode is used for the speed control of an asynchronous
motor via a V/f characterisc and is the simplest control mode.
4V/f characterisc control (VFC) ^ 116
In the following subchapters, each motor control is described in detail.
Motor control
Motor control selecon
115