Lenze i510 Series

11.18 Firmware download
The device rmware is connuously improved by the manufacturer. New rmware versions
contain error correcons, funcon extensions and simplify the handling.
A new rmware is always compable with the older version:
•
A device with updated rmware and unchanged parameter sengs shows the same
behaviour as before.
•
Parameter sengs must only be adapted if new funcons are used.
11.18.1 Firmware download with »EASY Starter (Firmware loader)«
The »EASY Starter (rmware loader)« is a PC soware which serves to update the rmware of
the inverter.
Precondions
•
For the rmware download, we recommend a direct USB connecon to the device. For
this purpose, the USB module and a USB 2.0 cable (A plug on Micro-B plug) are required.
The voltage supply of the control electronics also takes place via the USB connecon.
•
The control electronics of the inverter must be supplied with voltage. Either via the USB
connecon or via the external 24-V voltage supply.
•
Voltage supply and communicaon must not be interrupted during the rmware down-
load.
Addional funcons
Firmware download
Firmware download with »EASY Starter (Firmware loader)«
322