Lenze i510 Series

To Next Page

To Previous Page

5.2.2.1 Generate a connecon between inverter and »EASY Starter«

For commissioning the inverter with the »EASY Starter«, a communicaon link with the inver-

ter is required. This can be established in a wired or wireless manner via WLAN.

Precondions

•

For the wired communicaon with the inverter, the USB module and a USB 2.0 cable (A

plug on Micro-B plug) are required.

•

For the wireless

communicaon with the inverter, the WLAN module is required. More-

over, the PC on which the »EASY Starter« is installed must be wireless-enabled.

Commissioning

Operang interfaces

Engineering tool »EASY Starter«

Other manuals for Lenze i510 Series