Lenze i510 Series

5.2 Operang interfaces
Commissioning the inverter requires an operator-process interface.
5.2.1 Keypad
The keypad is an easy means for the local operaon, parameterisaon, and diagnoscs of the
inverter.
•
The keypad is simply connected to the diagnosc interface on the front of the inverter.
•
The keypad can also be connected and removed during operaon.
Detailed informaon on the keypad can be found in the appendix:
4Operate and parameterise the inverter with keypad ^ 430
Commissioning
Operang interfaces
Keypad
35