Lenze i510 Series

Parameter Name / value range / [default seng] Info
0x2631:028
(P400.28)
Funcon list: Acvate segment setpoint (bit 2)
(Funcon list: Setp: Segment b2)
•
From version 03.00
•
For further possible sengs, see parameter
0x2631:001 (P400.01). ^ 351
Assignment of a trigger for the "Acvate segment setpoint (bit 2)" func-
on.
Selecon bit with the valency 2
2
for the bit coded selecon and acva-
on of a parameterised segment setpoint.
Trigger = FALSE: selecon bit = "0".
Trigger = TRUE: selecon bit = "1".
Notes:
•
During normal operaon (no acve sequence), this funcon serves to
acvate the setpoint of a segment (instead of an enre sequence in
the sequencer operaon).
•
This funcon is not intended for the use in the sequencer operaon.
0 Not connected
0x2631:029
(P400.29)
Funcon list: Acvate segment setpoint´(bit 3)
(Funcon list: Setp: Segment b3)
•
From version 03.00
•
For further possible sengs, see parameter
0x2631:001 (P400.01). ^ 351
Assignment of a trigger for the "Acvate segment setpoint´(bit 3)" func-
on.
Selecon bit with the valency 2
3
for the bit coded selecon and acva-
on of a parameterised segment setpoint.
Trigger = FALSE: selecon bit = "0".
Trigger = TRUE: selecon bit = "1".
Notes:
•
During normal operaon (no acve sequence), this funcon serves to
acvate the setpoint of a segment (instead of an enre sequence in
the sequencer operaon).
•
This funcon is not intended for the use in the sequencer operaon.
0 Not connected
Flexible I/O conguraon
Setpoint change-over
Setpoint source segment setpoints
383