Lenze i510 Series

Parameter Name / value range / [default seng] Info
0x2000:010
(P190.10)
Device data: PU rmware version
(Device data: PU rmware ver.)
•
Read only
Firmware version of the power unit.
Example: "00202"
0x2000:011
(P190.11)
Device data: PU rmware type
(Device data: PU rmware type)
•
Read only
Firmware type of the power unit.
Example: "IDFW5AA"
0x2000:012
(P190.12)
Device data: PU bootloader version
(Device data: PU bootlder ver.)
•
Read only
Bootloader version of the power unit.
0x2000:013
(P190.13)
Device data: PU bootloader type
(Device data: PU bootlder type)
•
Read only
Bootloader type of the power unit.
0x2000:014
(P190.14)
Device data: Module - rmware version
(Device data: Mod. rmware)
•
Read only
Firmware version of the plugged-in module (e. g. WLAN module).
0x2000:015
(P190.15)
Device data: Firmware revision number
(Device data: FW revision nr.)
•
Read only
Firmware version of the network opon.
0x2000:016
(P190.16)
Device data: Bootloader revision number
(Device data: Bootloader revNo)
•
Read only
Bootloader version of the network opon.
0x2001
(P191.00)
Device name
(Device name)
["My Device"]
Any device name (e.g. "Wheel drive") can be set in this object for the
purpose of device idencaon.
0x2002:004
(P192.04)
Device module: CU type code
(Device module: CU type code)
•
Read only
Type code of the control unit.
0x2002:005
(P192.05)
Device module: PU type code
(Device module: PU type code)
•
Read only
Type code of the power unit.
0x2002:006
(P192.06)
Device module: CU serial number
(Device module: CU serial number)
•
Read only
Serial number of the control unit.
0x2002:007
(P192.07)
Device module: PU serial number
(Device module: PU serial number)
•
Read only
Serial number of the power unit.
Diagnoscs and fault eliminaon
Diagnoscs parameter
Device idencaon
87