Lenze i550 - Setpoint Potentiometer; Memory Modules; Memory Module Copier

Setpoint potenometer
For the external selecon of an analog setpoint.
The setpoint selecon (e.g. motor speed) can be manually set via the external potenometer.
The setpoint potenometer is connected to the analog input terminals of the inverter.
The
posion is displayed on the scale via the rotary knob.
The components have to be ordered separately.
Setpoint potenometer
Order code Name Version
ERPD0010K0001W
Potenometer
10 kΩ/1 W
ERZ0001 Rotary knob Diameter 36 mm
ERZ0002 Scale Scale 0 … 100 %,
Diame
ter 62 mm
Memory modules
For standard set-up, Lenze oers its customers mulpacked, unwrien memory modules
(EPM). T
ogether with the EPM copier, the EPMs can be duplicated at any place.
A memory module is included in the scope of supply of the inverter.
Memory module
Order code Version VPE
Piece
I0MAPA0000000M
Easily pluggable
Duplic
ate data set with memory module copier
12
Memory module copier
For duplicang data on memory modules for a faster standard set-up.
The memory module copier is a copying system for all memory modules from Lenze. With the
help of simple opcal user guidance, the data of a module is copied quickly and reliably to
another memor
y module.
Memory module copier
Order code Version
EZAEDE1001 Data set copier for memory modules
Accessories
Operaon and
diagnoscs
Setpoint potenometer
101