Lenze i550 - Important Commissioning Notes

Topologies / network
The inverters can be equipped with dierent eldbus networks.
The topologies and protocols typical for the prevailing networks are supported.
Currently available networks:
CANopen® is a communicaon protocol based on CAN.
CANopen® is a r
egistered community trademark of the CAN user organisaon CiA® (CAN in Automaon e. V.).
The EDS device descripon les for CANopen can be found here:
hp://www.lenze.com/applicaon-knowledge-base/arkel/200413930/0/
The Modbus protocol is an open communicaon protocol based on a client/server architecture and developed for
the
communicaon with programmable logic controllers.
The further development is carried out by the internaonal user organisaon Modbus Organizaon, USA.
PROFIBUS® (Process Field Bus) is a widely-used eldbus system for the automaon of machines and producon
plants.
PROFIBUS® is a registered trademark and patented technology licensed by the PROFIBUS & PROFINET Internaonal
(PI) user organisaon.
The GSE device descripon les for PROFIBUS can be found here:
hp://www.lenze.com/applicaon-knowledge-base/arkel/200412329/0/
EtherCAT® (Ethernet for Controller and Automaon Technology) is an Ethernet-based eldbus system which fulls
the applicaon prole for industrial realme systems
EtherCAT® is a registered trademark and patented technology, licensed by Beckho Automaon GmbH, Germany.
The XML device descripon les for EtherCAT can be found here:
hp://www.lenze.com/applicaon-knowledge-base/arkel/200800381/0/
EtherNet/IP™ (EtherNet Industrial Protocol) is a eldbus system based on Ethernet which uses the Common Indus-
trial Protocol™ (CIP™) for data exchange.
EtherNet/IP™ and Common Industrial Protocol™ (CIP™) are trademarks and patented technologies, licensed by the
user organisaon ODVA (Open DeviceNet Vendor Associaon), USA.
The EDS device descripon les for EtherNet/IP can be found here:
hp://www.lenze.com/applicaon-knowledge-base/arkel/201207514/0/
PROFINET® (Process Field Network) is a real-me capable eldbus system based on Ethernet.
PROFINET® is a registered trademark and patented technology licensed by the PROFIBUS & PROFINET Internaonal
(PI) user organisaon.
The GSDML device descripon les for PROFINET can be found here:
hp://www.lenze.com/applicaon-knowledge-base/arkel/200804173/0/
More informaon on the supported networks can be found at hp://www.lenze.com
Product informaon
The modular system
T
opologies / network
29