Lenze i550 - Power Supply Units; Brake Switches

Power supply units
For the external supply of the control electronics of the inverter.
The
parameterisaon and diagnoscs can be executed when the mains input at the inverter is
deenergised.
Order code EZV1200-000 EZV2400-000 EZV4800-000 EZV1200-001 EZV2400-001 EZV4800-001
Rated voltage V 230 400
Rated mains current A 0.8 1.2 2.3 0.3 0.6 1.0
Input voltage V AC 85 - 264
DC 90 ...350
AC 320 ... 575
DC 450 ...800
Output voltage V DC 22.5 - 28.5
Rated output current A 5.0 10.0 20.0 5.0 10.0 20.0
Brake switches
For switching an electromechanical brake.
The brake switch consists of a recer and an electronic circuit breaker.
It is mounted on the control cabinet plate by means of two screws. Control is performed using
a digit
al output on the inverter.
Brake switches Half-wave
recers Bridge recers
Order code E82ZWBRE E82ZWBRB
Input voltage V AC 320 - 550 AC 180 - 317
Output voltage V DC 180 (with AC 400)
DC 225 (with AC 500)
DC 205 (with AC 230)
Max. brake current A 0.61 0.54
Accessories
P
ower supply units
113