Lenze L-force E84A Series - Certification

Safety engineering
Certification
10

287
EDS84ASC552 EN 10.0
10.9 Certification
The certification of drive-based safety in the c ontrollers of the 8400 series is based on the
following test fundamentals:
ƒ EN ISO 13849-1
Safety of machinery - Safety-related parts of control systems - Part 1: General
principles for design
ƒ EN ISO 13849-2
Safety of machinery - Safety-related parts of control systems - Part 2: Validation
ƒ EN 60204-1
Safety of machinery - Electrical equipment of machines - Part 1: General
requirements
ƒ IEC 61508, Part 1-7
Functional safety of electrical/electronic/programmable electronic safety-related
systems
ƒ EN 61800-3
Adjustable speed electrical power drive systems - Part 3: EMC requirements and
specific test methods
ƒ EN 61800-5-1
Adjustable speed electrical power drive systems - Part 5-1: Safety requirements -
Electrical, thermal and energy
ƒ EN 61800-5-2
Adjustable speed electrical power drive systems - Part 5-2: Safety requirements -
Functional
ƒ EN 62061
Safety of machinery - Functional safety of safety-related electrical, electronic and
programmable electronic control systems
 Declarations of conformity and certificates can be found on the internet
at:http://www.Lenze.com and on the product CD.