Operating and safety instructions
Safety instructions
Lenze • BA v200-C v800-.C • 1.1 65
3.7 Safety instructions
Attention
Damage due to electrostatically sensitive components
Damage to the device can be caused by electrostatically sensitive components.
All installation and service work performed on the device must be performed only under safe,
secure and de-energised conditions.
Note
Always adhere to the safety measures applicable when handling components at risk of being
damaged by electrostatic discharges.
The provisions of DIN EN 61340-5-1 / DIN EN 61340-5-2 apply
To Next Page
Loading...
